Phantom 4 RTK + D-RTK 2 Mobile Station Combo (NA) (SP Plus)
Custom Order Item
Mavic 2 Intelligent Flight Battery
The Mavic 2's Intelligent Flight Battery has a capacity of up to 59.29 Wh, and provides a maximum flight time of 31 minutes. With a built-in DJI Intelligent Battery Management System, battery status is monitored and reported in real-time, allowing you to focus less on your power levels and more on having an epic flight.
High-capacity LiPo cells 31 Minutes of flight time Multiple intelligent battery protection features
Inspire 2 180W Power Adaptor (without AC cable）
Inspire 2 PART 16 180W Power Adaptor (standard version) (without AC cable)
The Inspire 2 180W Power Adaptor charges the Inspire 2 remote controller and battery using AC power. It takes approximately 1.5 hours to fully charge an Inspire 2 Intelligent Flight Battery or 2.5 hours to charge an Inspire 2 remote controller. When charging both devices together, charging may take longer than 2.5 hours.
Compatible with Matrice 200 series. This LiPo 6S battery has a capacity of 7.66Ah, which translates to 38 minutes of flight time with no payload and 26 minutes of flight time with full payload.
Minimum Order Quantity of 4
This is a great new tool in drone lens cleaning technology, all products are designed to remove fingerprints, dust and grease. Perfect for drone camera lenses, filters, sensors and other optical items. Comes with a handy retractable dust removal brush and a special non-liquid cleaning element, designed to never dry out. LensPen products have cleaned camera lenses and all optics for more than 25 years. Safe and very easy to use on any drone. Get up to 500 cleans from each LensPen for Drone product.
LensPen MicroPro is 9.5 cm long with our smallest cleaning tip at just 8mm in diameter.
High Capacity battery for the Matrice 200. The intelligent flight batteries for the Matrice 200, 210 and 210RTK allow for increased capacity and flight time over the TB50 batteries.
These batteries have an intelligent self heating function that heats the batteries to approximately 5 degrees Celsius for a more stable voltage drop-off and longer flight times in cold weather situations.
The smart board inside the batteries monitors battery life, charge cycles, voltage and more. This info is relayed to the DJI Go app for realtime monitoring from the ground.
Cendence Remote Controller
Provides up to five analog control channels and over ten customizable buttons, improving overall control efficiency.
HDMI, SDI, USB, and CAN ports provide robust expansion capabilities. Cendence comes with the fully integrated Cendence Monitor Mounting Bracket.
Dials, Levers, and Knobs The two knobs on the front panel control gimbal pitch and yaw, and the right/left levers and Focus Adjustment Knob are used to tune flight controller settings and the gimbal camera in real-time, allowing you to pull focus and set aperture.
Camera Settings For quick camera adjustments, you can customize several shortcut buttons for particular groups of settings, or save frequently used settings.
Custom Control Customizable buttons can quickly enable or disable frequently used functions like focus peaking, color waveform, obstacle avoidance, and home point resetting, or close warnings and tips midflight, all without using an app.
Button Combinations Rotate the dials or the toggle the right/left levers while holding certain buttons to control gimbal roll, shutter speed, aperture, or ISO.
Detachable Design, CrystalSky Compatibility The CrystalSky monitor mounts to the Cendence remote controller via the Cendence Monitor Mounting Bracket.
The Cendence remote controller’s antennas, PCB, mounting bracket, and battery are all detachable, making its hardware easily upgradable, allowing you to customize the controller for compatibility with future DJI aircraft.
Dual Operator Control When precision camera control is required, the Cendence remote controller can connect as either a master or slave controller with the Inspire 2’s remote controller or another Cendence remote controller.
Multiple Ports SDI and HDMI ports support broadcasting at 1080i50 and 720p60. Connect DJI Focus, or other compatible accessories via the CAN port. The USBA port supports connectivity with other mobile devices.
Battery System Cendence uses a detachable battery that operates for up to four hours. If you run out of power, just swap in a charged battery or charge Cendence via the power port. Cendence uses the same batteries as CrystalSky monitors, enhancing product synergy.
Multiple Accessories Practical accessories make using Cendence easy.
The Cendence Support Rig takes on part of the controller’s weight, making it easier to hold for long periods of time.
Control Stick Covers prevent dust from entering both sticks, ensuring smooth and reliable control.
The Interchangeable Mobile Device Holder lets you attach a phone or tablet instead of a CrystalSky monitor.
Inspire 2 Matrice 200 Series CrystalSky Intelligent Battery Cendence - Mobile Device Holder
Custom Order Item
Mavic 2 Enterprise Dual (SP)
Custom Order Item
5.2K video support for high-end professional filmmaking.
Equipped with an up-rated Micro 4/3 sensor, the Zenmuse X5S has a dynamic range of 12.8 stops with a much improved signal to noise ratio and color sensitivity than the X5R. It supports up to eight standard M4/3 lenses (including zoom lenses) with focal lengths ranging from 9mm-45mm (equivalent to 18mm-90mm on a 35mm camera), allowing more creative flexibility. The new CineCore 2.0 image processing system on the Inspire 2 makes the Zenmuse X5S capable of capturing 5.2K 30fps CinemaDNG video and Apple ProRes video as well as 4K 60fps using H.264 and 4K 30fps using H.265 (both at 100Mbps). Continuous DNG burst shooting at 20fps with 20.8MP images is also supported. The Zenmuse X5S was designed to keep pace with the rigors of high-end professional aerial imaging.
Stabilizing the Zenmuse X5S is a highly optimized 3-axis gimbal with pinpoint-precise motor rotation with a control accuracy of ±0.01° powered by a dedicated processor. Rather than rely on electrical slip rings — as is common with many gimbals — the Zenmuse X5S uses a unique mechanically limited design and concealed wires to ensure more stable data transmission and greater durability. Vibration is eliminated using three damping balls and a lightweight damping board, creating seamlessly smooth video.360° rotation remains possible through gimbal rotation and smooth aircraft yaw. Stable, smooth footage can be captured even when using a 90mmlens.
GPC-Reflective adhesive strips
DOT-C2 Reflective tape strips
DOT reflective tape (Premium easy peel strips) red and white reflective tape designed for rugged us on trailers and trucks